You are here: Home > Mustang (05 - 09) > Powertrain

Choose a sub category: Induction Supercharger Engine Components

Sort By: Price: Low to High Price: High to Low Most Popular Title Manufacturer Newest Oldest 20 per page 40 per page 80 per page 120 per page 200 per page Page of 1   100mm Cold Air Kit Retail $599.99 Intro Price $469.00 100mm Cold Air Kit - Polished Retail $749.99 Intro Price $619.00 TECHCO designed this Cold Air Kit to be the highest flowing kit available.  The cold air kit Air Filter Shroud contains a large volume area to fit the high-volume Conical washable/reusable Air Filter, Billet Aluminum Venturi with 100mm Inlet Orifice, Billet Aluminum 100mm Mass Air Flow Meter Housing, and high-flow 100mm Cold Air Inlet Tube.  The result is over 80lb/min flow at 5volts with your stock (MAFS) Sensor (MAFS Curve provided with the installation instructions for Required Custom Tune).  The Flow Bench tested design of the TECHCO 100mm Cold Air Kit flows 951 CFM @ 19 IN H2O, a 45% increase over Stock and outflows the Saleen 98mm (Rubber & Hard Tube).  This Cold Air Kit fits both Stock and Saleen Series VI Supercharged S197 V8 Mustang applications.  This Cold Air Kit was featured on the 720HP SMS 25th Anniversary Mustang. Dress up your engine bay by opting for the fully Polished 100mm Cold Air Kit.  This kit features Polished Billet Aluminum Mass Air Flow Meter Housing and Venturi.  This is jewelry for your car! 100mm Cold Air Kit w/Diablo Predator and (2) Tunes (91/93 Octane) Retail $969.99 Intro Price $849.00 5.0L 3V Crate Engine - 2005-2009 Mustang Retail $13,590.00 The addition of the Predator Tune with the TECHCO 100mm Cold Air kit gives you the complete solution by providing (2) tunes (91 octane and 93 octane tune) for increased performance, along with the standard manual tune features of the Preadator. The TECHCO fuel-injected 5.0L Crate Engine delivers a staggering 450HP in Naturally Aspirated Form and can produce well over 950HP Supercharged.  Our Engines are built with only the highest quality Forged Aluminum and Steel Rotating Assembly and all parts are made here in America.  The crankshafts are fully balanced and our CNC ported Cylinder heads are equipped with high lift, high duration Camshafts.  All our components parts made in America.  Available in High (10.5:1) or Low (9.2:1) Compression for your Naturally Aspirated or Supercharged Needs.  This engine produced 720HP and 612Ft.Lbs. (667RWHP/565RWTQ) in supercharged form on our build of the SMS 25th Anniversary Mustang. 100mm Cold Air Kit w/Diablo Predator and (2) Tunes (91/93 Octane) - Polished Retail $1,119.99 Intro Price $999.00 Billet Aluminum 100mm Mass Air Flow Meter Housing Retail $199.99 Intro Price $179.00 Dress up your engine bay by opting for the fully Polished 100mm Cold Air Kit w/Predator.  This kit features Polished Billet Aluminum Mass Air Flow Meter Housing and Venturi.  This is jewelry for your car! The TECHCO 100mm Mass Air Meter Housing is manufactured from Billet Aluminum and is available to those that want to make their own intake systems with the performance and reliablity for an accuratly machined MAF Housing. 5.0L Pistons (3.55 Bore) Retail $899.99 Rods Retail $695.99 TECHCO high performance forged pistons are specifically designed to reduce weight, improve strength, durability, and ring sealing. Available in high & low compression ratios. TECHCO forged steel connecting rods are designed and manufactured with by TECHCO engineers with high quality, high strength and high performance in mind. Manufactured from high grade 4340 forged steel, TECHCO high performance connecting rods are the choice of professional engine builders and racers. Billet Aluminum 100mm Velocity Stack (MAF Housing, Venturi, and Filter) Retail $399.00 Ported Saleen SC Manifold and Inlet Tube Retail $1,199.99 The TECHCO 100mm Velocity Stack is manufactured from Billet Aluminum and is available to those that want to make their own intake systems with the performance and reliablity for an accuratly machined MAF Housing, Venturi, and High Flow Air Filter. TECHCO's extensive in-house Engine Machine Shop and experienced technicians offers the best in CNC and hand porting to provide you with the highest flowing ported manifold. Billet Aluminum 100mm Velocity Stack (MAF Housing, Venturi, and Filter) - Polished Retail $549.00 Crank - Balanced (3.80 Stroke) Retail $899.99 Dress up your engine bay by opting for the fully Polished 100mm Velocity Stack.  This kit features Polished Billet Aluminum Mass Air Flow Meter Housing and Venturi.  This is jewelry for your car! TECHCO High-strength premium forged steel crankshaft machined from proprietary forgings. For use in high-performance and race applications. Crank nose is machined for full-length damper key and features 2.100" rod throws and the 8-bolt flange  3.800" stroke. High Flow CNC Ported Heads (Plus Customer Core) Retail $1,599.99 Ported Stock Throttle Body Retail $249.99 Our CNC ported aluminum heads feature CNC porting of the Intake, Exhaust and Combustion Chamber and Valve Job. Heads feature state of the art design for maximum flow over the entire lift curve. These heads are used on our 5.0L Crate Engine and was used on our build of the SMS 25th Anniversary Mustang.  These Heads will drastically improve HP & torque on both supercharged and naturally aspirated Mustangs.  Heads include valves, springs and plugs. TECHCO's high-flow 62mm throttle body flows 30% better than Stock, with a performance increase of 7-10HP, Improved Throttle Response, CNC-Machined OEM-Housing to eliminate ETC issues associate with aftermarket Throttle Bodies.  This Cold Air Kit was featured on the 720HP SMS 25th Anniversary Mustang. TECHCO 3.0L Supercharger - 4.6L 3V Mustang Retail $7,500.00 Intro Price $6,995.00 TECHCO 3.0L Supercharger - 4.6L 3V Mustang - Polished Retail $9,000.00 Intro Price $8,495.00 What makes the TECHCO Reverse-Revolution Twin Screw Supercharger so revolutionary is the unique design (Patent Pending), which optimizes airflow efficiency throughout.  Incoming air is fed into the front of the supercharger, not the back like conventional designs.  This ensures that the incoming air has minimal turns, eliminating restrictions, before entering into the supercharger housing.  Additionally, without the need for a complex inlet tube, the largest possible orifice size is maintained, maximizing air flow efficiencies.  The air then flows into the lobes of the Reverse-Revolution asymmetric multi-lobe compressor screws, where it is compressed, not merely moved, as in other forms of supercharging.  The compressed air then flows into the intercooler housing which houses (2) intercoolers mounted in an A-Frame configuration to ensure the airflow is evenly distributed to each runner bank.  The Patent Pending Twin Intercooler design results in higher cooling capacity and greater thermal efficiencies as the cooling water only has to pass through the intercoolers once, keeping the charge air cool.  A further benefit of the front Inlet Design is the additional package space above the supercharger that is used for long high flow Intake Runners, which increases low end torque.   The resulting design of The TECHCO Reverse-Revolution Twin Screw Supercharger allows air to move through the supercharger quickly and efficiently, without significant heat buildup, and at the highest resulting airflow volume at low boost output.  The performance result is maximized horsepower and torque output.     Dress up your engine bay by opting for the fully Polished TECHCO Reverse-Revolution Twin Screw Supercharger.  This is jewelry for your car! Diablo Predator and (2) Tunes (91/93 Octane) Retail $399.99 Camshafts Kit (Includes Springs and Retainers) Retail $1,505.00 TECHCO's offeres (2) Tunes for 91 octane and 93 octane preflashed on the Predator for increased performance and drivability.  The TECHCO Predator Tune combined with the standard manual tune features of the Preadator, allow for customizable changes by the user. TECHCO camshafts are designed to extract the most out of your supercharged or naturally aspirated Mustang. TECHCO 720 HP Supercharged Engine Upgrade-Install Only, Call for details List Price: $13,999.99 Our Price: $13,999.99 Now available as an upgrade to any Saleen Supercharged vehicle or any Mustang GT with a Saleen Series VI Supercharger installed. The TECHCO 720HP Engine Upgrade is a complete conversion of your vehicle’s engine into a true 5.0L High Output Balanced and Blue Printed engine. This Engine Package was featured on the SMS 25th Anniversary Mustang. Key Features of The TECHCO 720HP Supercharged Engine Upgrade: • TECHCO 100mm Cold Air Kit w/Custom Tuned Diablo Predator Flash • TECHCO Ported GT Throttle Body (Core Required) • TECHCO Ported Saleen Supercharger Inlet Tube (Core Required) • TECHCO Ported Saleen Supercharger Manifold (Core Required) • TECHCO High Output Supercharger Pulley • TECHCO CNC Ported Extreme Flow Cylinder Heads (Core Required) • TECHCO High Performance Camshafts • TECHCO 5.0L Cylinder Block Bore & Hone w/Torque Plates (Core Required) • TECHCO 5.0L Forged Rotating Assembly (Pistons/Rods/Crank/Bearings) • TECHCO Hand Assembled Engine with Gasket Kit • TECHCO Dynojet Chassis Dynamometer Testing Before and After Modification