|
|
|
|
|
|
100mm Cold Air Kit
|
Retail $599.99
Intro Price $469.00
|
|
|
TECHCO designed this Cold Air Kit to be the highest flowing kit available. The cold air kit Air Filter Shroud contains a large volume area to fit the high-volume Conical washable/reusable Air Filter, Billet Aluminum Venturi with 100mm Inlet Orifice, Billet Aluminum 100mm Mass Air Flow Meter Housing, and high-flow 100mm Cold Air Inlet Tube. The result is over 80lb/min flow at 5volts with your stock (MAFS) Sensor (MAFS Curve provided with the installation instructions for Required Custom Tune). The Flow Bench tested design of the TECHCO 100mm Cold Air Kit flows 951 CFM @ 19 IN H2O, a 45% increase over Stock and outflows the Saleen 98mm (Rubber & Hard Tube). This Cold Air Kit fits both Stock and Saleen Series VI Supercharged S197 V8 Mustang applications. This Cold Air Kit was featured on the 720HP SMS 25th Anniversary Mustang.
|
|
|
|
|
|
|
|
|
|
|
|
|
100mm Cold Air Kit - Polished
|
Retail $749.99
Intro Price $619.00
|
|
|
Dress up your engine bay by opting for the fully Polished 100mm Cold Air Kit. This kit features Polished Billet Aluminum Mass Air Flow Meter Housing and Venturi. This is jewelry for your car!
|
|
|
|
|
|
|
|
|
|
|
|
|
100mm Cold Air Kit w/Diablo Predator and (2) Tunes (91/93 Octane)
|
Retail $969.99
Intro Price $849.00
|
|
|
The addition of the Predator Tune with the TECHCO 100mm Cold Air kit gives you the complete solution by providing (2) tunes (91 octane and 93 octane tune) for increased performance, along with the standard manual tune features of the Preadator.
|
|
|
|
|
|
|
|
|
|
|
|
|
TECHCO POWER LAB (TPL) 302 3V Crate Engine - 2005-2010 Mustang
|
|
Retail $11,999.99
|
|
|
The TECHCO fuel-injected 5.0L Crate Engine delivers a staggering 450HP in Naturally Aspirated Form and can produce well over 950HP Supercharged. Our Engines are built with only the highest quality Forged Aluminum and Steel Rotating Assembly and all parts are made here in America. The crankshafts are fully balanced and our CNC ported Cylinder heads are equipped with high lift, high duration Camshafts. All our components parts made in America. Available in High (10.5:1) or Low (9.2:1) Compression for your Naturally Aspirated or Supercharged Needs. This engine produced 720HP and 612Ft.Lbs. (612RWHP/520RWTQ) in supercharged form on our build of the SMS 25th Anniversary Mustang.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
100mm Cold Air Kit w/Diablo Predator and (2) Tunes (91/93 Octane) - Polished
|
Retail $1,119.99
Intro Price $999.00
|
|
|
Dress up your engine bay by opting for the fully Polished 100mm Cold Air Kit w/Predator. This kit features Polished Billet Aluminum Mass Air Flow Meter Housing and Venturi. This is jewelry for your car!
|
|
|
|
|
|
|
|
|
|
|
|
|
5.0L Pistons (3.55 Bore)
|
|
Retail $899.99
|
|
|
TECHCO high performance forged pistons are specifically designed to reduce weight, improve strength, durability, and ring sealing. Available in high & low compression ratios.
|
|
|
|
|
|
|
|
|
|
|
|
|
Billet Aluminum 100mm Mass Air Flow Meter Housing
|
Retail $199.99
Intro Price $179.00
|
|
|
The TECHCO 100mm Mass Air Meter Housing is manufactured from Billet Aluminum and is available to those that want to make their own intake systems with the performance and reliablity for an accuratly machined MAF Housing.
|
|
|
|
|
|
|
|
|
|
|
|
|
Billet Aluminum 100mm Velocity Stack (MAF Housing, Venturi, and Filter)
|
|
Retail $399.00
|
|
|
The TECHCO 100mm Velocity Stack is manufactured from Billet Aluminum and is available to those that want to make their own intake systems with the performance and reliablity for an accuratly machined MAF Housing, Venturi, and High Flow Air Filter.
|
|
|
|
|
|
|
|
|
|
|
|
|
TECHCO 3.0L Supercharger - 2005-Current 4.6L 3V Ford Mustang
|
List Price: $7,500.00
Our Price: $7,500.00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Rods
|
|
Retail $695.99
|
|
|
TECHCO forged steel connecting rods are designed and manufactured with by TECHCO engineers with high quality, high strength and high performance in mind. Manufactured from high grade 4340 forged steel, TECHCO high performance connecting rods are the choice of professional engine builders and racers.
|
|
|
|
|
|
|
